Ready to connect Color Grafic Touch LCD version 2 with ILI9341 display controller
The myTouch LCD Add-On combines the large color TFT "Color Touch LCD Grafic
module" with an expansion board that has both sides on the myMCU standard
connector. By means of this pre-made port, an instant connection with myAVR-,
mySTM32- and myXMC boards or own developments are built. About a 20-pin
female connector can further add-ons or custom boards with this add-on
combine. An SD card slot allows for additional functionality.
can be combined with
o own developments
color depth: 65 K
3,2 inch (=8,1 cm) TFT
320 x 240 pixel, QVGA
touch-IC: ADS7843, serial
SD card slot
takes a few connecting cables
myTouch LCD Add-On with myXMC4500 Board PLUS
The supply voltage is approximately 3.3 V.
To operate in 5V environment not guaranteed. The Jumper 2
(Backlight) with a suitable series resistor should
example of use / tutorials
You can find helps for the programming of the display in our download-area and in the follow tutorials.
Please note: The tutorials are only in german.