Features:

• Plastic box in modern USB stick design, no danger of short circuit
• Standard USB controller (SiLabs CP2102) adapted for WindowsXP- WindowsVISTA- Windows7, Linux, MacOSX
• 6 pole standard ISP connection
• STK500v2 or AVR910/911 protocol
• Very fast because of "double buffering" and auto ISP-Speed-Detect
• Compatible to AVRStudio, BASCOM, CodeVision, myAVR Workpad, SiSy AVR and many more
• Updatable via bootloader
• Programming voltage 5 V and 3 V (selectable via software)
• 3 LEDs for status indication (red/green/blue)

Properties:

• Only ISP programmer for Atmel AVR microcontroller in USB stick design
• Many AVR systems can programmed very fast and easy via the USB interface
  • He is extra fast through double buffering and
  • Has auto-ISP-speed
• There is no danger of short-circuit through open conductor plates because the programmer is in a case
• Integration in an operation system and the programming software are totaly transparent via a virtual COM port
• Power supply:
  • Because of the integrated intelligent module for the power supply you can program systems from 3,3 V until 5 V
  • You can switch the programming power dynamical via software
• Firmware
  • The programmer will be delivered with the firmware STK500 V2 (standard)
  • You can also put the firmware AVR911 / 910 / 109 as alternative on it
  • The firmware with which the programmer will be delivered has an automatically step-down-mode:
    • for controller which must be switched to slower clocks under 1 MHz and which you couldn't activate with the standard ISP speed
• Updatable because of the preinstalled bootloader
  • So you can actualize the firmware for new protocols or controller types
• Software:
  • The myAVR software products support the mySmartUSB light extra efficient
  • He can also be used directly and easy from the AVR studio or with BASCOM and other developments
• Driver are available for
  • Windows CE, Windows 2000 / 2003 / XP / Vista / Windows 7
  • Linux
  • MacIntosh OSX
  => You can download the driver at www.silabs.de
  => USB driver for myAVR products
  
  
• Has traffic, error and status indication

Usage

• The programmer will be inserted in the PC or Notebook very easy like an USB stick and so he is supplied with voltage.
  • Therefore no external power supply unit (e.g. battery) is necessary for the aim system
• Ideal for notebook users because the programmer don't need a parallel or serial port!

Technical data:

• Supply voltage: 5 V
• Operational current: 10 - 20 mA typical without more users
  until 100 mA by connection with other aim systems
• Operating temperature: 0 - 30 ° C

Mechanical data:

• Dimensions: 60 mm x 30 mm x 12 mm
• Weight: 12 g
• Grid dimension: 2,54 mm

Scope of delivery:

• USB programmer
• ISP cable, 6 pole (flat cable)
• Product description

Supported controller types (selection):