Search for product

Hotline / Order

Tel.: +49 (0)3585 / 470 222
Fax: +49 (0)3585 / 470 213
 > Overview > Components

Single controller, electronic components, modules, crystal oszilator (quartz), female connector, multi-pin connector, etc. which are used with myMCU products, are here available for low cost as additon of these products or to complete your own circuits.


Article


Article Price / piece Quantity
Multi-pin connector 6pole, single-row  DE EN  0.20 Euro
Special items:
Multi-pin connector: pins are 8.3 mm long 
Infrared receiver(TSOP38238)  DE EN  1.85 Euro
Infrared receiver for own circuit
  • wavelength max.: 950 nm
  • supply voltage: 2,5 ... 5,5 V
  • supply voltage: 38 kHz
  • frequency response: max. 45 m
 
Infrared emitter diode (TSUS4300) and resistor  DE EN  0.55 Euro
Infrared emitter diode with series resistor
  • Peak wavelength: 950 nm
  • forward voltage: 1,3 ... 2,2 V
  • switching times: 800 ns by 100 mA; 400 ns by 1,5 A
 
myTouchOne Modul V.2 - Color Graphic Touch LCD  DE EN  21.30 Euro
Color Graphic Touch LCD as Add-On for own projects
  • display controller: ILI9341
  • 320x240 pixel
  • color depth:65 K
  • SD-card slot
 
Graphic LCD 128x64, module  DE EN  14.95 Euro
Graphic lcd, 128x64 of the company Displaytech Ltd. with white background illumination
  • 128 x 64 pixel
  • pixel size: 0.33 x 0.33 mm
 
Text LCD module, 2x16 char, 5 V   DE EN  8.90 Euro
Text LC display with 2 lines of 16 characters and backlight 
myAVR Stamp 256K PLUS (SMD equipped)  DE EN  64.00 Euro
powerfull 100-pin controllerStamp with USB interface and SD-card-slot
  • ATmega2650
  • pre-installed bootloader
  • mini USB-interface
  • micro SD-card slot
  • SMD equipped
 
myAVR Stamp 64K (SMD equipped)  DE EN  39.00 Euro
Compact microcontroller module with ATmega640
  • ATmega640
  • Programming via JTAG or ISP
  • SMD equipped
 
EEPROM 2048bit M24C02 DIP   DE EN  0.30 Euro
The EEPROM, suitable for the myTWI EEPROM.  
Real time clock DS1307  DE EN  4.38 Euro
The real time clock, suitable for the myTWI real time clock. 
Temperature sensor LM75 on DIP8  DE EN  4.80 Euro
Complete painted temperature sensor on DIP8 with condenser, suitable for the myTWI temperature sensor. 
ATmega8A -PU, DIP 28 (16 MHz)  DE EN  3.25 Euro
8-bit AVR microcontroller with clock frequency up to 16 MHz  
ATmega48PA-PU  DE EN  2.80 Euro
 
ATmega88PA-20PU  DE EN  4.38 Euro
AVR-RISC-Controller in DIP housing. The 8 K version of the ATmegaX8 series.  
ATmega168A-PU  DE EN  3.10 Euro
AVR-RISC-Controller in DIP housing. The 16 K version of the ATmegaX8 series.  
ATmega328P-20PU  DE EN  4.75 Euro
AVR-RISC-Controller in DIP housing. The 32 K version of the ATmegaX8 series.  
ATmega32A-PU (16 MHz)  DE EN  5.30 Euro
AVR-RISC-Controller in DIP housing.  
ATtiny13 - 20 PU  DE EN  1.35 Euro
Low-power CMOS 8-Bit Microcontroller  
ATtiny10  DE EN  0.95 Euro
8-bit AVR Microcontroller with 1024 Bytes In-System programmable Flash 
bootloader burner  DE EN  2.75 Euro
prepare controller/programmer for use with a myAVR article 
Quartz 0,032768 MHz   DE EN  0.18 Euro
The quartz, suitable for the myTWI real time clock. 
Quartz 3,6864 MHz  DE EN  0.40 Euro
The adapted quartz to the ATmega8.  
Quartz 7,3728 MHz  DE EN  0.40 Euro
The quartz 7,3728 MHz is particularly suitable for an exact timing and to define an exact baudrate for the UART communication.  
Quartz 8 MHz  DE EN  0.40 Euro
The fastest quartz for the ATmega8A. 
Quartz 16 MHz  DE EN  0.40 Euro
The adapted quartz e.g. for the ATmega8.  
Quartz 20 MHz  DE EN  0.40 Euro
The adapted quartz e.g. for the ATmega48, ATmega88 and ATmega168.  
IC socket 28  DE EN  0.49 Euro
To plug on microcontrollers. Suitable for the ATmega8.  
Skirting board SPL20, single-row  DE EN  0.39 Euro
Skirting board 20 pole, single-row. 
Skirting board SPL8, single-row  DE EN  0.16 Euro
Skirting board 8 pole, single-row. 
Female connector 10pole, grid dim. 2,54, angulate   DE EN  0.48 Euro
Female connector, suitable for the mySmartUSB. 
Female connector 20pole, single-row, angulate   DE EN  0.55 Euro
Female connector, suitable for the myAVR Board 
Female connector 33pole, grid dim. 2.54  DE EN  1.95 Euro
Female connector, grid dimension 2.54 mm, single-row, suitable for the STM32F0-Discovery  
Multi-pin connector 10pole, grid dim. 2,54  DE EN  0.33 Euro
Multi-pin connector, suitable for the mySmartUSB. 
Multi-pin connector 20pole, single-row, angulate   DE EN  0.45 Euro
The multi-pin connector is suitable for the myAVR Board.  
Multi-pin connector 2x5, RM 2.54, double row  DE EN  0.15 Euro
Multi-pin connector, suitable for PowerKit V5 
multi-pin connector 2x20, grid dim. 2.54  DE EN  1.25 Euro
double row multi-pin connector with different pin length on both sides 
SMD multi-pin connector 2x30, RM 1,27  DE EN  4.45 Euro
SMD multi-pin connector
  • 2x30 pins
  • grind: 1,27
  • pairs recommended
 
SMD Female connector 2x30, RM1.27  DE EN  4.55 Euro
SMD: female connector
  • 2x30 pins
  • grind 1,27
 
Pin connector 6pole  DE EN  0.15 Euro
Pin connector 6pole 
Pin connector 10pole  DE EN  0.15 Euro
Pin connector 10pole 
Lithium battery 3 V, 20,0 x 3,2 mm   DE EN  0.70 Euro
The lithium battery is suitable for the myTWI real time clock. 
Battery holder 20 mm  DE EN  0.45 Euro
The battery holder is suitable for the lithium battery, 20 mm. 


All prices included with VAT of 19% or 7%.

Our regional partners

Business partner wanted!

To expand our sales area we are looking for partners to represent our products and interests of the Laser & Co. Solutions GmbH.

XMC product line

For beginners

Controller board

Shop  •  Download  •  Shop-infos  •  Quality  •  Customers worldwide  •  Privacy  •  Shipping and payment  •  Contact

Copyright © Laser & Co. Solutions GmbH, 2009-2015