Description:
The circuit diagram for the my7-Segment add-on in a png-file.

Description:
With help of this document it is very easy to equip the my7-segment add-on. In the assembly instruction there is included a circuit diagram, the assembly diagram as well as a description to the procedure of the assembly.

Description:
After the building of this add-on from the kit you can test the functionality of the board with help of this test program.

Description:
The myDigitalOut board extends the myAVR board with four relay outputs. With this, you can realize switching operations to 30 watt. The dimensioning of the outputs is designed for laboratory experiments or applications for model making.
myDigitalOut you will find in our shop.

Description:
In these instructions a diagram visualizes the operation principles of our myDigitalOut Add-On. Also it shows technical and mechanical data. The myDigitalOut board extends the myAVR board with four relay outputs. With this, you can realize switching operations up to 0.5A at 48V and 1A at 24V. The dimensioning of the outputs is designed for laboratory experiments or applications for model making. The Add-On myDigitalOut is solid and aligned to the myAVR board

Description:
The Circuit diagram in a png-file

Description:
The original data sheet to the relay OMRON. This relay is used at myDigitalOut.

Description:
The myDigitalOut board extends the myAVR board with four relay outputs. With the kit experienced electronics technicians can build up this circuit board. This assembly instruction for the myDigitalOut containing a layout diagram and short informations for assembly.

Description:
myFinder is a metal projector which is based on pulse induction technologie and uses a microcontroller. The metal detector consists of the myAVR Board and the circuit board add-on. The abbreviated documentation contains the description of the hardware, calibration and handling of the detector. ...

Description:
myFinder is a metal projector which is based on pulse induction technologie and uses a microcontroller. The metal detector consists of the myAVR Board and the circuit board add-on. The abbreviated documentation contains the description of the hardware, calibration and handling of the detector.
The project myFinder contains the detector circuit board (as kit or populated), a textbook and a CD with codes, datasheets and more.
It is offered to the extent of supply of the project in our shop, the myAVR board does not belong.

Description:
Original data sheets in English of Atmel for the microcontroller ATmega8