Search for product

Hotline / Order

Tel.: +49 (0)3585 / 470 222
Fax: +49 (0)3585 / 470 213

myAVR Downloads

Search in category:
Search for number:
DL237: Circuit diagram to mySmartLab
Description:
The Circuit diagram to the mySmartLab in a png-file
available files:
DL250: assembly instruction mySmartLab
Description:
The extension board mySmartLab is already SMD equipped. This document contains instructions regarding further steps for equipping, as well as the circuit diagram and assembly diagram.
available files:
Ico
File:
ba_mysmartlab_de_en.pdf
Size: 324KB
DL252: Software for mySmartLab
Description: +
This zip file contains the software mySmartLab. Switching the firmware of the mySmartUSB from programmer mode to oscilloscope/logic analyzer ...
available files:
Ico
File:
tool_mysmartlab.zip
Size: 1084KB
DL98: Product description mySmartControl MK2
Description:
mySmartControl MK2 is a compact microcontroller-board with a AVR RISC controller from Atmel and a standardized USB interface. The programming is possible via a pre-installed Boot loader or over ISP. mySmartControl is ready to be used as it is.
The communication with the PC runs completely transparent over a virtual COM-Port.
available files:
Ico
File:
pb_mysmartcontrol_de_en.pdf
Size: 1519KB
Ico
File:
pb_mysmartcontrol_de_fr.pdf
Size: 6773KB
DL113: Technical description mySmartControl MK2, version 1.11
Description: +
mySmartControl MK2 is a compact microcontroller-board with a AVR RISC controller from Atmel and a standardized USB interface. The programming is possible via a pre-installed Boot loader or over ISP.
In order to perform control tasks the module uses a 20-pin female header as myAVR standard connection.The communication with the PC runs completely transparent over a virtual COM-Port.
The firmware simpleTerminal (tool_simple-terminal.rar...
available files:
DL116: Working example mySmartControll MK2: External power supply
Description: +
The mySmartControl MK2 can comfortably be programmed with the fast myAVR bootloader, however, ISP interface can be retrofitted.
It is possible ...
available files:
DL119: Application Note for Prototyping Board A and mySmartControl MK2
Description: +
This examples application describes the structure of an LED matrix for the mySmartControl MK2 and a prototyping board A. There is a LED Matrix that is constructed with 3x6 LEDs. Each LED should be separately controllable. With an LED matrix, there can be any signs and symbols to be displayed.
...
available files:
Ico
File:
tool_simple-terminal.zip
Size: 11KB
DL255: archive: mySmartControl MK2, version 1.09
Description:
In this archive are product description, technical description and documents for examples of use. The circuit diagram is in the separatly zip-file.
The version 1.09 is without the integrated prototype area.
available files:
DL97: Product description myMultiProg MK1/MK2
Description:
With the programmer myMultiProg you receive an universal und inexpensive high-quality product to program most AVR controllers. myMultiProg is available with a LPT or an USB interface. The programming interface is integrated on myMultiProg already.
From the version 1.07 is an ISP Interface added.
available files:
Ico
File:
pb_mymultiprog_de_en.pdf
Size: 679KB
Ico
File:
pb_mymultiprog_de_fr.pdf
Size: 678KB
DL70: Technical description to the universal programmer 'myMultiProg MK1/MK2'
Description:
With the universal programmer myMultiProg you receive an inexpensive and high-quality solution to program most AVR controllers in DIP-housing with an ISP interface. The programming interface is integrated on the myMultiProg. In spite of the compact dimensions seven different sockets of the newest generation for Classic AVR, Tiny AVR, Mega AVR and also AVRs are integrated on the board. myMultiProg supports many compatible programming types, what allows it to be used with numerous AVR development tools on different operating systems.
The description contains all technical and mechanical data for LPT and USB as well as the circuit diagram, the layout, the assembly diagram, a list of supported controllers and programmer settings to both alternatives.

available files:
Ico
File:
techb_mymultiprog_de_en.pdf
Size: 2156KB
Ico
File:
techb_mymultiprog_de_fr.pdf
Size: 2978KB
Ico
File:
techb_schaltplan-mymultiprog-mk1-107.png
Size: ## file not found ##KB
To open and read the pdf-files you need the following software:
Adobe Reader

Our regional partners

Business partner wanted!

To expand our sales area we are looking for partners to represent our products and interests of the Laser & Co. Solutions GmbH.

myAVR Board MK3

Develop games with

XMC product line

Controller board

Shop  •  Download  •  Shop-infos  •  Quality  •  Customers worldwide  •  Privacy  •  Shipping and payment  •  Contact

Copyright © Laser & Co. Solutions GmbH, 2009-2015