Search for product

Hotline / Order

Tel.: +49 (0)3585 / 470 222
Fax: +49 (0)3585 / 470 213
 > Overview > myAVR products > systemboards and programmer

The system boards are completely equipped experimental and development boards. They are designed for entry into the microcontroller programming or rather user-specific developments. Using standard Add-On sockets allows the system board to be extended with add-ons and modules.
Via USB interface are the PC and the programmer able to communicate over different protocolls (myMode, AVR910/911, STK500) with each other. Here can various programming methods be used, e.g. ISP, High Voltage parallel, High Voltage serial and TPI. Selected programmer can be used as a USB to UART Bridge and establish a serial connection from the PC to the target system.


Article


Article Price / piece Quantity
mySmartUSB light - AVR ISP programmer  DE EN  15.95 Euro
The cheap ISP programmer in USB stick design.
  • Fast because of the double buffer and auto-ISP-speed
  • Compatible with SiSy AVR, myAVR Workpad, BASCOM, AVRStudio, CodeVision etc.
 
myAVR Board MK3 256K PLUS, equipped   DE EN  154.00 Euro
First class AVR development board
  • high-speed USB programmer
  • 100-pin controller with pre-installed bootloader
  • grafic LC display
  • many input and output devices
  • microSD-card slot
  • extra mini USB connection
 
myAVR Board MK3 64K, equipped   DE EN  129.00 Euro
First class AVR development board
  • high-speed USB programmer
  • 100-pin controller with pre-installed bootloader
  • grafic LC display
  • many input and output devices
 
myAVR Board MK2, equipped  DE EN  49.00 Euro
Developerboard for ATMEL microcontroller
  • programming by removeable daughterboard mySmartUSB MK2
  • typical in- and outputdevices
  • with photo sensor
  • Infrared interface for receiver and transmitter
 
mySmartUSB MK2 (programmer and bridge)  DE EN  28.00 Euro
The future-proof solution for ISP-Programming and data communication via UART, TWI, IC or SPI
  • without an external power supply
  • very fast data communication and programming speed
  • blockmode of the AVR911 protocol
 
mySmartUSB MK3 (programmer and bridge)  DE EN  38.00 Euro
High-speed USB programmer and communication interface
  • to program AVR microcontroller,
  • supported several protocols, programming modi and interfaces like UART, TWI and SPI
 
myUSBtoUART  DE EN  7.95 Euro
Powerful compact module, it makes virtual COM port available
  • for communication between PC and microcontroller
  • TTL compatibel
  • will be used as a standard USART
 
mySmartControl MK3  DE EN  67.00 Euro
Compact controler board of the upper AVR performance class
  • Powerful platform for the myAVR Stamp
  • graphic display
  • input and output devices
  • myAVR standard interface
  • maximum capacity to the myAVR Board MK3
 
mySmartControl MK2 32K  DE EN  32.00 Euro
The compact microcontroller-board with an AVR RISC controller from Atmel and a standardized USB interface
  • Maximum compatibility with the ATmega328 by 20 MHz
  • with an integrated prototype area
 
mySmartControl MK2 16K  DE EN  28.00 Euro
The compact microcontroller-board with an AVR RISC controller from Atmel and a standardized USB interface
  • Maximum compatibility with the ATmega168 by 20 MHz
  • with an integrated prototype area
 
mySmartControl MK2 8K  DE EN  26.00 Euro
The compact microcontroller-board with an AVR RISC controller from Atmel and a standardized USB interface
  • Maximum compatibility with the ATmega8 by 3,6864 MHz
  • with an integrated prototype area
 
myEthernet 128K, equipped  DE EN  64.00 Euro
The myEthernet with the ATmega1284P!
  • extrem compact and quickly network solution for an embedded web server
  • Monitoring and control via network
  • Web design via HTML on a MicroSD card
 
myEthernet 64k, equipped  DE EN  59.00 Euro
The myEthernet with the ATmega644P!
  • extrem compact network solution for an embedded web server
  • Monitoring and control via network
  • Web design via HTML on a MicroSD card
 
myMultiProg MK2, equipped  DE EN  19.49 Euro
The all-purpose programmer for most AVR-microcontroller
  • 7 different DIP-sockets (8, 14, 20, 28 and 40 pin)
  • USB interface with "mySmartUSB MK2"
  • 6 pole ISP interface
  • Power LED and prog LED
 
Atmel ICE programmboard (ATATMEL ICE PCBA)  DE EN  48.95 Euro
Debugger and programmer board for ARM Cortex-M based Atmel SAM and AVR microcontroller
  • USB 2.0 high-speed interface
  • JTAG interfaces (AVR and SAM)
Included in delivery is only the board, no wires 
AVR Dragon (ATAVRDRAGON)  DE EN  64.95 Euro
universal development tool from Atmel with ISP and JTAG interface 
STK500 (ATSTK500)  DE EN  104.00 Euro
A programmer and development system from ATMEL for all 8-, 20-, 40-pole AVR Flash microcontrollers in DIP case 
STK600 (ATSTK600)  DE EN  248.90 Euro
A programmer and development system from ATMEL for 8 to 144-pole AVR Flash microcontrollers in SMD case 
myMultiProg MK3 PLUS, assembly kit  DE EN  39.95 Euro
The universal programmer for AVR Controller in DIF-housing
  • ZIF-socket
  • 7 controller-specific coding plugs
  • 2 free coding plugs
 


All prices included with VAT of 19% or 7%.

Our regional partners

Business partner wanted!

To expand our sales area we are looking for partners to represent our products and interests of the Laser & Co. Solutions GmbH.

mySmartUSB light

STM32-Produktlinie

XMC product line

Shop  •  Download  •  Shop-infos  •  Quality  •  Customers worldwide  •  Privacy  •  Shipping and payment  •  Contact

Copyright © Laser & Co. Solutions GmbH, 2009-2015