myMultiProg MK3 is an universal extension board which can be used for programming various AVR controllers in DIP housing.
Different AVR controllers can easily be attached to the board. This is done via a ZIF socket. As programmer we recommend using the mySmartUSB MK3. The connection from the USB programmer to the controller is realized with using different, controller-specific coding plugs.
You can ever recover controllers with wrong fuses, due to the fact that the mySmartUSB MK3 supports several programming modes (ISP, High-voltage Serial, High-voltage parallel).
The integrated programmer types of the mySmartUSB MK3 allow for using it with various AVR development tools on different operating systems.
Please consider: the USB programmer does not belong to the scope of supply !
Universal programming board for ATMEL microcontrollers in DIP-housing
ZIF socket for easy fixation of controllers
Rescuing of controllers with wrong fuses possible.
supported controllers (amongst others):
Sampling rate: 10 kHz
Operating current: max. 100 mA via USB; 1 A via external supply
Betriebsspannung: max. 4,8 V via USB; 5,3 V via external supply
Interface data: port depending on PC configuration; programming via standard USB cable A-B (USB 2.0)
Scope of supply:
1x PCB myMultiProg MK3, already SMD equipped
with 7 different coding plugs and 2 coding plugs for costumer's usage
1x ZIF socket
1x 62 pin socket for coding plug
2x 10 pin female connector
4x feets for the board
the USB programmer is not included in scope of supply