mySmartControl MK3: compact ... efficient ... with grafic-display
a controller board of the upper AVR performance class!
mySmartControl MK3 is a compact controller board of the upper AVR performance class, equipped with
grafic-display, different input and output devices and also myAVR standard interface. So it is an
additional or alternative solution to our education and developing board
myAVR Board MK3 and
is maximal compatible to this board.
The programming of the mySmartControl MK3 is possible with a
myAVR Stamp or a myAVR Board MK3.
The programming of a myAVR Stamp is possible via pre-installed bootloader, by ISP or with a myAVR Board MK3.
The power supply takes place over USB or a separate connection.
An external power supply should be between 6 V and 12 V.
In order to perform control tasks the module has a 20-pin extension connection
as myAVR standard connection and further more capabilities of connecting.
The communication with the PC runs completely transparent over a virtual COM-Port.
It is small in size and yet multifunctional. It can be used in small-sized
systems as well as in professional applications. mySmartControl MK3 provides many
possibilities for use and different options for equipping.
The structure of the board is stable.
AVR RISC controller board, suitable for
myAVR Stamp 64 K
myAVR Stamp 256 K PLUS
myAVR Stamp 64 K PLUS (no longer part of our shop)
myAVR Stamp 256 K (no longer part of our shop)
industrial standard-controller (CP2102) from SiLabs
communication between Controller and PC by USB-interface,
provides a virtual COM port in the PC
optional ISP-connector with 6 pin Atmel standard configuration
as well as JTAG-connector with 10 pin Atmel standard configuration
fast „in system“ programming alternatively over ISP
or , only PLUS version, via USB and bootloader
quartz for accurate timing
power supply via USB
connection for external power supply 6-12 V
integrated voltage regulation
extension connection with 18 free available pins, as well as VCC and GND