Search for product

Product groups

Overview

Shop infos

Overview:

Infos general

Overview:

Hotline / Order

Tel.: +49 (0)3585 / 4702-22
Fax: +49 (0)3585 / 4702-13

myAVR Board light PLUS, assembly kit

Product groups > Top Sellers > myAVR Board light PLUS, assembly kit

more pictures

available downloads for this product:

myAVR Board light and myAVR LCD add-on for text:
soldering ... programming ... testing

This combined kit consists of the board myAVR Board light and the myAVR LCD Add-On. It is recommended for learners who like to build the hardware themselves for their experiments.
The myAVR Board light is a development board to learn the programming of microcontrollers. The programming of the controller and the communication with PC are realized by the USB interface.
The myAVR Board light is the low cost version for scholars, students and trainees. It is without the comfort like the boards of MK2 or MK3. Regardless it contains all the necessary components needed to learn microcontroller programming.
The myAVR LCD add-on expands the myAVR Board light with a text LCD. On this LCD texts can be displayed 2 lines, each with 16 characters.

Properties

myAVR Board light, assembly kit

development board for ATMEL microcontrollers
mini USB interface
programming and comunication via USB
power supply via USB
programmable in Assembler, C/C++ and BASCOM
ISP interface optional
Easy to handle, special cables not nessecary
Expansion socket for additional add-ons

myAVR LCD add-on, assembly kit

High-quality LC display(2 lines, 16 characters for each line)
operating voltage: typical 4.8 - 5.3 V
Background illumination:

can be switched via jumper
regulated via the microcoller program

Equipment

myAVR Board light, assembly kit

mini USB interface via myUSBtoUART
ATmega8A with preinstalled myAVR bootloader (myAVR ProgTool)
→ properties of the ATmega8 [show/hide]

Input and output devices:

3 miniature switches
2 potentiometer
1 analogue photo sensor
1 Buzzer (frequency converter)
3 LEDs (red, green, yellow)

grid 2.54 mm (0.1 inch)

myAVR LCD Add-On, assembly kit

LCD for text with 2 lines each for 16 characters
with background illumination
with contrast control
Jumper for setting the R/W signal
with connections for myAVR boards as well as for further add-ons

You can find a general view of our development boards here:

Supported controlers

ATmega8/48/88/168/328
ATtiny48/88

Bootloader

You can find bootloader for Windows in our Download-area (search "DL120" or "bootloader")
for different controllers
You can find bootloader for LINUX in our Download-Area (search "DL233" or "LINUX")

Please note:
The controller included in this kit is supplied with bootloader, default for use with windows operating system.
When you purchase an additional controller for this board, we recommend you to order it with a bootloader. Please mention this in your online order in the comments field.

Scope of supply:

myAVR Board light, assembly kit

1 microcontroler ATmega8
with pre-installed bootloader for Windows
1 USB-2-UART-bridge with mini USB connection
1 green LED 2 mA
1 yellow LED 2 mA
1 red LED 2 mA
3 capacitor 100 nF
2 capacitor 22 nF
3 resistor 1.2 kΩ
1 resistor 10 kΩ
1 photo sensor
1 inductor 10 μH
1 quartz 3.6864 MHz
2 potentiometer
2 shaft for potentiometer
2 miniature button 9.5 mm
1 miniature button 4.3 mm
1 buzzer
1 female connector
4 feets for the board
1 circuit board
multi-colored patch cables

myAVR LCD add-on, assembly kit

1 circuit board
1 LCD modul with 2 lines and each 16 characters
1 female connector, 20 pole
1 multi-pin connector, 20 pole
1 multi-pin connector, 16 pole
2 multi-pin connector, 3 pole
1 potentiometer (for contrast)
1 resistor 1.2 kΩ
1 resistor 10.5 kΩ
1 transistor (regulation for illumination via PWM)
2 jumper
4 feets for the board

Example of use:
myAVR Board light with
myAVR LCD Add-On

Also order!

The myAVR Solder set . The perfect basic equipment for all hobbyist and people who solder!

myAVR Board light PLUS, assembly kit reasonably priced! learn and experimenting board to equip and solder by yourself, and also the assembly kit for the myAVR LCD Add-On connection via mini-USB, optional via ISP ATmega8 In- and output devices grid: 2.54mm LC-display with 2x16 characters background illumination contrast control	list price: 29.95 Euro

We recommend the following articles:
	cable mini USB

	ISP Connect Kit 10/6 pole

	IC-Sockel 28

	Pin connector 6pole

	Skirting board SPL8, single-row

	myAVR Solder set

	GraficLCD Add-On, assembly kit