Description:
The mySmartUSB MK3 is a compact high-speed USB programmer for Atmel microcontroller. You can program different AVR-systems via the USB interface wit...

Description:
The mySmartUSB MK3 is a compact high-speed USB programmer for Atmel microcontroller. You can program different AVR-systems via the USB interface with this board. The communication interface works as an UART, TWI/I²C or SPI bridge.
The communication with the PC is completely transparent and realized by the help of a virtual COM-port. The power supply is assured by the connection of the board to the PC.

Description:
The mySmartUSB MK3 is a compact high-speed USB programmer for Atmel microcontroller.
This document contains the most important properties for t...

Description:
The mySmartUSB MK3 is a compact high-speed USB programmer for Atmel microcontroller.
This document contains the most important properties for this board, also some functions will be chart. The display of the LED`s will be received and the mode 'myMode' will be described. Further it shows a view details to the different settings of the programmer.

Description:
Current firmware for the mySmartUSB MK3: Version 1.20, build 1834

Description:
This archive includes documents of the mySmartUSB MK3 until to hardwareversion 3.16. Their is also the firmware from the versions 1.03, 1.05, 1.08 and 1.11.

Description:
The myAVR Stamp is constructed as a pluggable daughterboard. With it you can develop microcontroller solutions and test them directly in the MK3-environment followed by an installation of the myAVR Stamp as an embedded controller into any target system.
The stamp is equipped with the powerful 16 MHz 100-PIN-AVR-Controller from ATMEL. This controller optionally is available with 64K or 256K bytes of program memory.

Description:
On the pluggable daugtherboard you can develop microcontroller solutions and test them directly in the MK3-environment followed by an installation of the myAVR Stamp as an embedded controller into any target system.
This document contains the most important properties for this board. Further it shows a view with inscription, the technical and mechanical data and also the pin description.

Description:
The Circuit diagram to the myTWI PortExpander in a png-file

Description:
mySmartControl MK3 is a compact microcontrollerboard of the upper AVR performance. In combination with the myAVR Stamp you get the maximum power and flexibility. The programming of the myAVR Stamp is possible via a pre-installed bootloader, via ISP or via the myAVR MK3 developing board. In order...

Description:
mySmartControl MK3 is a compact microcontrollerboard of the upper AVR performance. In combination with the myAVR Stamp you get the maximum power and flexibility. The programming of the myAVR Stamp is possible via a pre-installed bootloader, via ISP or via the myAVR MK3 developing board. In order to perform control tasks the module uses a 20-pin female header as myAVR standard connection.
Our board mySmartControl is an addition or alternative solution to our educational and developing board myAVR Board MK3. It is small in size and yet multifunctional. It can be used in small-sized systems as well as in professional applications.

Description:
The processing board mySmartControl MK3 is explained short in this document. The most important properties are named. Technical and mechanical data as well as the circuit diagram are also contained.
The file "techb_schaltplan-msc3.png" containes the circuit diagram separately.

Description:
The circuit diagram of the processing board mySmartControl MK3 is available as an high resolution png-file.