Configuration

• myMultiProg MK2, equipped
• 7 different DIP Sockets for AVR Controller (8, 14, 20, 28, 40)
• USB interface over USB-programmer "mySmartUSB MK2" or "mySmartUSB MK3" (not included in delivery)
• with connectors for "mySmartUSB MK2" or "mySmartUSB MK3"
• 6pin ISP interface (ISP Connect Kit and 6pin plug not included)
• crystal oscillator 3.6 MHz
• power LED and prog LED

Description:

• universal programming board for ATMEL micro-controllers in DIP housing
• inexpensive, high quality
• integrated USB programming interface
• integrated 6pin ISP interface
• compact size
• 7 different sockets integrated for classic AVR, Tiny AVR, Mega AVR and newer AVR models
• compatible programmers:
  • mySmartUSB MK2
  • mySmartUSB MK3
  • mySmartUSB light
  • other programming devices with 6pin ISP interface
  
  
• USB-programmer mySmartUSB MK2 (not included):
  • Programmer and UART-Bridge
  • Datatransfer with UART, TWI (I�C) or SPI without external power supply like power supply unit or battery
  • a variety of AVR-systems can be programmed by ISP-adapter
  • update possible by bootloader, e.g. if support new processors or commands
  • with industry standard-controller (CP2102) USB to serial converter
  • Power On and Power Off from user possible
  • make available virtual COM-port
  • can used separately:
  • to programm over ISP-connection other AVR-systems
  • to realise a USB-parallel-interface
  • to realise a USB-serial-interface (UART = COM = RS232)
  • etc.

Technical data:

• Operating current: 10 - 20 mA
• Operating voltage: 3.3 - 5.3 V
• Operating temperature: 0 - 30 ° C (32 - 86 ° F)

Mechanical data:

• Measurements: 90 mm x 90 mm x 18 mm
• Weight: 60 g
• Raster scale: 2.54 mm (1 inch)

Scope of supply:

• 1 fully equipped and tested circuit board
• 4 additional board feet to protect the board from scratching and other damages

Attention: The USB-programmer mySmartUSB MK2 is not included in delivery and has to be requested additionally if required. Did you have a myAVR Board MK2, so is it not necessary.

Supported controllers:

• DIP8 Classic: AT90S2323, AT90S2343
• DIP8 Tiny: ATtiny12, ATtiny13, ATtiny15, ATtiny25, ATtiny28, ATtiny45, ATtiny85
• DIP14 Tiny: ATtiny24, ATtiny44, ATtiny84
• DIP20 Classic: AT90S2313
• DIP20 Tiny: ATtiny2313, ATtiny26
• DIP28 Classic: AT90S4433
• DIP28 Mega: ATmega8, ATmega48, ATmega88, ATmega168
• DIP40 Classic: AT90S8535, AT90S8515
• DIP40 Mega: ATmega16, ATmega162, ATmega32, ATmega8535, ATmega8515