At first build the development board from the individual components,
and then develop microcontroller programs and operate it
The myAVR Board light is a development board to learn the programming of microcontrollers.
The connection between board and PC is via
mini USB cable.
The programming of the controller and the communication with PC are realized by the USB interface.
The myAVR Board light is the low cost version for scholars, students and trainees. It is without
the comfort like the boards of MK2 or MK3.
Regardless it contains all the necessary components needed to learn microcontroller programming.
The holes in the circuit board are precisely adapted for patching.
Skirting boards are therefore not the standard equipment of the kit, but they can be purchased separately.
You can find bootloader for Windows in our
(search "DL120" or "bootloader") for different controllers
You can find bootloader for LINUX in our
(search "DL233" or "LINUX")
The controller included in this kit is supplied with bootloader, default for
use with windows operating system.
When you purchase an additional controller for this board, we recommend you
to order it with a bootloader. Please mention this in your online order in
the comments field.
Scope of supply:
1 microcontroler ATmega8
with pre-installed bootloader for Windows
1 USB-2-UART-bridge with mini USB connection
1 green LED 2 mA
1 yellow LED 2 mA
1 red LED 2 mA
3 capacitor 100 nF
2 capacitor 22 nF
3 resistor 1.2 kΩ
1 resistor 10 kΩ
1 photo sensor
1 inductor 10 μH
1 quartz 3.6864 MHz
2 shaft for potentiometer
2 miniature button 9.5 mm
1 miniature button 4.3 mm
1 female connector
4 feets for the board
1 circuit board
multi-colored patch cables
Recommended articles (not included in scope of supply)